Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

Wahoo RPM Cadence Sensor (BT/ANT+)
$59.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Wahoo RPM Speed Sensor (BT/ANT+)
$59.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Wahoo RPM Speed/Cadence Sensor Combo Pack (BT/ANT+)
$114.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Specialized ANGi Crash Sensor
$59.99
Our patented ANGi sensor calls for help when you can’t. In fact, it’s the first device to protect you before, during, and after a crash. It does this through a pairing with our Specialized Ride App for iOS or Android devices. And if it detects a crash, it commences a countdown that, if you’re ok, you can stop and keep riding. If, however, ANGi determines that you’re in need of help, it’ll send an alert to your selected contacts with your last known GPS coordinates and a message that you’re in need of help. What about if you’re out of service coverage? ANGi has a plan for that. Just set your estimated ride time before you head out when you know that your ride will take you out of range. All you need is an active data signal when you start your session. And if you haven’t completed your ride within that time frame, ANGi will send a notification to your contacts with your last uploaded location. - ANGi is a ride tracker, crash detector, and safety beacon. - Includes a one-year subscription to Specialized Ride Premium app. - Detects and reports potentially dangerous helmet impacts to the Specialized Ride app, which notifies your emergency contacts and sends them your most recent GPS coordinates. - Additional premium features include start ride notifications and ride-time alerts. - Attaches to Specialized ANGi-ready helmets. - Approximate six months' battery life on a 2032 coin cell battery. - Weight: 10 grams w/ battery - Two-year sensor warranty
Specialized Turbo Pedal Assist Battery Charger
$264.99
Charge your Specialized Turbo battery with this high output, custom Li-ion charger. • Custom Specialized Li-ion battery charger • Output: 42V4A • Compact design while delivering huge power • With Rosenberger plug and light indication of the charging status
Profile Design UCM Universal Computer Mount 25mm
$16.95
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Profile Design UCM XL Universal Computer Mount 60mm
$16.95
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
Giant RideSense Speed and Cadence Magnet Kit
$9.99
Get the most out of your ride with the addition of speed and cadence. Whether you are a weekend warrior or data junkie we’ve got you covered. Features - Sensor magnet kit for RideSense speed and cadence sensors Kit includes: - RideSense speed magnet - RideSense cadence magnet
Garmin Bike Speed Sensor 2
$54.99
Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.
Garmin Bike Speed Sensor 2 and Cadence Sensor 2 Bundle
$95.99
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Garmin Cadence Sensor 2
$54.99
Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.
CatEye Cadence Pedal Magnet
$5.99
Cadence Magnet for all CatEye computers that record cadence.
Zipp QuickView Integrated Mount for Service Course and SL Speed Stems
$99.99
Zipp's QuickView Integrated stem faceplate computer mount provides an efficient fix for an emerging challenge on modern bikes: system integration. This new mount doubles as the stem faceplate for a clean look that securely holds your cycle computer and a light or camera. No more multiple mounts bolted on here and there. The mount sits in front of your Zipp stem, positioning it for easy viewing and access. This is an easy way to add elegant integration to your road bike. - Computer compatibility: Garmin, Wahoo - Accessory compatibility: GoPro - Lights: Niterider Lumina Series (with adapter), Light and Motion, Bontrager (with adapter), Gloworm (with adapter), Lezyne (with adapter), Infini (with adapter), Sigma Sport - Lifetime warranty
Zipp QuickView Road Low Computer Mount
$31.99
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp QuickView TT Computer Mount
$31.99
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Zipp Vuka Shift AXS Computer Mount
$44.00
Handlebar computer mount for Garmin/Wahoo for Vuka Shift AXS
Topeak CubiCubi 6000 mAh Powerpack
$69.99
For CubiCubi 500 / 850 / 1200 - 3.7V 6000mAh Li-ion power bank - Recharge via a micro-USB cable - Charge time (approx) : 4-6hr - Charge phone and other devices with USB charge cable - Input: Micro-USB (5V/1A) - Output: USB (5V/1A)
Topeak F55
$4.99
Band style clamp with integrated QuickClick mount for fast, easy attachment and removal of Topeak Ratchet Rocket tool case and SmartPhone DryBag. - Fits 22mm-44mm tubes
Topeak Heart Rate Monitor Chest Strap Extension
$9.99
Chest Strap Extension to increase length of original chest strap. - 25cm extension
Topeak RideCase Center Mount w/SC & G-Ear Adapters
$64.99
Symmetry is a beautiful thing. This RideCase mount brings everything in line, front and center to offer easier viewing of your device, a perfectly centered video frame, or a light beam cast in the center of your route. Attaches to 31.8mm diameter handlebars and the QuickClick holder can be rotated for both portrait and landscape orientation. The included sport camera adapters are compatible with different sport cameras like GoPro Hero series, Sony Action Cam series, Shimano Sport Cameras, and Garmin VIRB X / XE. Includes G-Ear Adapter for Garmin cycle computer. - Material: Forged aluminum / Engineering grade plastic - Bracket: For Handlebar (fits 31.8mm) - Max Load: Sport camera 200 g / 7.04 oz - Added Features: Angle adjustment (Sport Camera) Rotates for landscape or portrait viewing (RideCase) - Compatible with RideCase series & PanoComp X Includes T15 wrench - Size: 11 x 6.6 x 4.7 cm / 4.3” x 2.6” x 1.9” (Center Mount only) - Weight: 36 grams
Stages Cycling Stages Dash 31.8mm Out-Front Mount
$62.99
This mount is among the lightest and most compact available, with a reliable metal-on-metal interface. By eliminating the quarter-turn fitment, we can mount the Dash close to the bar for a sleek, aerodynamic fit. Compatible with Stages Dash accessories, including GoPro, via three threaded holes beneath the mount. - Mounts to the right of the stem, holding the computer level to the bars and in front of the bike - Has a plastic clamp, which requires a 2.5mm allen key to tighten - Compatible with all Dash-specific accessories via 3 threaded holes underneath the main arm of the mount - For Stages Dash L10, L50, and M50 - Compatible with 31.8mm handlebars
Stages Cycling Stages Dash Anywhere Mount
$15.99
On your stem? On your bar? Traveling and renting a bike? The Anywhere Mount has you covered. Quarter-turn style mount attaches anywhere with rubber o-rings. It mounts anywhere on the bike using 2 o-rings or a special attachment that allows the mount to be inserted in a standard quarter-turn mount like a Garmin. - For Stages Dash L10, L50 and M50 - Fits anywhere on the bike - Quarter-turn mounts
Stages Cycling Stages Dash Blendr Mount, Lower
$70.99
This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. Featuring an accessory bolt hole pattern, it can be used with Stages accessories. - For Stages Dash L10, L50 and M50 - Fits Blendr-compatible stems - Works with Stages accessories, including GoPro attachment
Stages Cycling Stages Dash Blendr Mount, Upper
$70.99
This mounts specifically to the Blendr system supported by Trek, which is similar to a GoPro interface. - Designed to mount Dash above additional accessories or to the Blendr stem with a bottom attachment - For Stages Dash L10, L50 and M50 - Fits Blendr compatible stems
Stages Cycling Stages Dash GoPro Accessory Mount
$31.99
Mounts Dash and accessories using widely available GoPro connection. Lights? Camera? Action. - Mounts beneath compatible Stages Dash mounts using 3 screws - Has a hand-tighten screw for adjusting angle of GoPro-style mount attachments - For use with new Out Front, Integrated, Tri, Enve, and Lower Blendr Dash mounts
Stages Cycling Stages Dash Integrated 2-Bolt Out-Front Mount
$70.99
This mount fits most integrated bar/stem designs with a two-bolt interface below stem. - Mounts to a 2-bolt pattern (parallel to the direction of a stem) integrated handlebar (bolts not included) - Holds the dash level to the bars and in front of the bike. - For Stages Dash L10, L50 and M50 - Fits Shimano PRO and some Canyon integrated bars
Stages Cycling Stages Dash Over-The-Stem Mount For 31.8mm & 35mm Handlebars
$62.99
Place Dash behind the bar for improved visibility and better protection from mishaps on the trail. - Mounts to the left of the stem, holds the Dash above the stem and bars such that a crash will not break the Dash - Has a plastic clamp that requires 2.5mm allen key to tighten to handlebars - Has rubber spacer so the mount can be used on 31.8mm bars. No accessories can be bolted to the bottom of the mount. - For Stages Dash L10, L50, and M50 - Compatible with 31.8mm and 35mm bars
Stages Cycling Stages Dash Top Cap Mount
$70.99
Attaches Dash to steer tube beneath top cap. Great for mountain bikes and setups with minimal handlebar space. - Mounts to the top cap of a bike by replacing a headset spacer - Angle can be controlled by loosening and tightening the pivot bolt - For Stages Dash L10, L50, and M50 - Fits all 1-1/8" headsets with room for a spacer over the stem
Stages Cycling Stages Dash Tri Mount
$62.99
This mount has accessory bolt holes on the bottom so it can be used with stages accessory attachments. - Mounts to the right TT bar, holds the dash in the center of the TT bars by tightening 2.5mm allen key head bolts - Can fit smaller 22mm bars using a rubber spacer (included) - Height, and therefore, bar clearance can be controlled by adjusting the pivot screw. - For Stages Dash L10, L50 and M50 - Compatible with 24mm and 22mm aero extensions - Fits a wide range of aero bars and includes a pivot for multiple placement options and ideal viewing angle
Stages Cycling Stages Dash—Cadence Sensor
$62.99
Stages magnet-free Cadence sensors fit to your crank arm and rear hub to provide real-time, accelerometer-based cadence data to your cyclometer or phone via ANT+ and Bluetooth Smart. - Compatible with most crank arms - Installs/removes in seconds - IPX7 Water-resistant - Super light—just 8 grams - Runtime: 600 hours - Operating range: 18-200 rpm - Blue and red LEDs indicate pairing, activation, and low battery status
Page 1 of 4 Next page